G-Pen G-Pen Connect is now available Shop Now

Dr. Dabber Light Kit Vaporizer

by Dr Dabber

Vaporizer for solid concentrate use

Concentrate

Dr. Dabber Light Kit Vaporizer

WE PRICE MATCH!

Give Us A Call, We'll Happily

Price Match This Item

877-865-2260
Dr. Dabber Light Kit Vaporizer

Dr. Dabber Light Kit Vaporizer

by Dr Dabber

Vaporizer for solid concentrate use

Concentrate

Black

COLOR:


  • 10 second shutoff
  • Titanium Coils
  • Runs at Lower Temperatures
  • For Concentrates
  • Instant heating
  • Long lasting battery life

Regular price

$49.95

+ $0.00

$49.95

OUT OF STOCK

  • 10 second shutoff
  • Titanium Coils
  • Runs at Lower Temperatures
  • For Concentrates
  • Instant heating
  • Long lasting battery life
Description

Dr. Dabber Light Kit Vaporizer

Designed to run at lower temperatures for maximum aroma transfer, the Light Kit uses the same titanium coils as the Ghost Kit for a clean, fresh taste.

How it Works

Simply load only enough concentrate for one session directly onto the atomizer, replace the cap and then press and hold the power button to draw.

What's in the Box

  • Light Vaporizer Kit
  • Stainless Steel Tool
  • Extra Atomizer
  • USB Charger
  • Shatterproof Container
  • User Manual

Reviews & Questions

FAQs

How do I use the Dr. Dabber Light Vaporizer?

As with most pen vaporizers, the Light is super easy to use. Refer to the full instructions located on the ‘User Guide’ tab, but here is a quick rundown on using the Light: Charge the Light – This could take a few hours the first time, but subsequent charges should not take longer than 46-60 minutes. Load the Light – This is easily done by removing the mouthpiece, and using the included tool to apply your concentrates on top of the atomizer coil. Do not load too much, more than a sessions worth is definitely too much. Ensure the concentrate the making contact with the atomizer. Replace mouthpiece and apply silicone mouthpiece covers, if desired. Power up and Draw – If the switch on the Light is locked, unlock by pressing the button five times. This enables the power switch and the Light is ready to use. Press the button and immediately begin drawing from the Light. Best practice is to keep the Light as vertical as possible during use. Draw until you have had your fill, or the ten-second shut off turns the atomizer off. Many owners find that taking one more draw through a cooling Light (no power applied while drawing) keeps the air vents from clogging.

How long does it take for the Light Vaporizer to pre-heat?

The Light heats up instantly. With a powerful (for its size) 650mAh battery, the Light heats up fast, and keeps heating long past other vaporizers of this size.

How do I change the temperature of the Light Vaporizer?

There are no temperature settings on the Light. It goes from room temperature to its peak temperature in one second.

What determines the vapor quality in the Light Vaporizer?

First and foremost it’s vital that you use the cleanest and purest liquids and concentrates you can find. The Light was designed for use with liquids and concentrates that melt cleanly and leave no particulate behind. When particulate makes contact with the atomizer, it can overheat and will degrade the lifespan of your cartridge exponentially. Since the Light has only one temperature setting, its pretty foolproof. Press the button, and draw until you have your fill or until the Light shuts off automatically after 10 seconds. Adjusting your draw rate can have an effect on vapor thickness; draw faster for thinner vapors, slower for thicker vapors.

Can I put dry herb in the Light Vaporizer?

The Light was designed solely for liquids and concentrates. Do not put aromatic blends into atomizer included with the the Light. There are atomizers available for blends, please contact Dr. Dabber for more information.

Will the Light Vaporizer work on 240v power?

The charger is USB and will work globally.

The vapor from the Light Vaporizer seems thin. What can I do to change that?

First and foremost it’s vital that you use the cleanest and purest liquids and concentrates you can find. The Light was designed for use with liquids and concentrates that melt cleanly and leave no particulate behind. When particulate makes contact with the atomizer, it can overheat and will degrade the lifespan of your cartridge exponentially. Adjusting your draw rate can have an effect on vapor thickness; draw faster for thinner vapors, slower for thicker vapor. Since the Light has only one temperature setting, it’s essentially foolproof. Press the button, and draw until you have your fill or until the Light shuts off automatically after 10 seconds.

What is the Light Vaporizer heating element made from?

The Light has a titanium atomizer coil wrapped around a ceramic wick.

Will the Light Vaporizer over-heat?

Liquids and concentrates love high temperatures, so you should not have an overheating issue!

How full should the Light Vaporizer's heating chamber be?

It’s best to not fill the heating chamber full. Just apply enough for one session at a time. The Light was not designed to hold more than one session at a time.

How often should I stir the bowl when using the Light Vaporizer?

Occasionally through use, especially when drawing rapidly, the melted concentrate can cling to the sides of the crucible, preventing it from making contact with the atomizer coil. Using the unique included tool, you can ‘push’ the buildup on the sidewalls back down into the crucible for use. Use caution not to make contact with the atomizer, you could damage it very easily.

Is there an auto-shutoff on the Light Vaporizer?

Yes, after ten seconds of use, the Light will power off. There is also a safety on the power switch, clicking it five times turns off the power button, and repeating this turns the button back on. This is great if you have the Light in your purse, or pocket, as it prevents it from going off accidentally and wasting your battery or worse. As a general safety rule, do not leave the Light unattended while powered on.

What size screens does the Light Vaporizer use?

There are no screens in the Light.

What type of battery does the Light Vaporizer use?

The battery is Barrel shaped, with 650mAh.

What charging options do I have with the Light Vaporizer?

The Light comes with an USB plug. The USB plug can be used by itself in a powered USB port anywhere in the world.

How do I know if my Light Vaporizer battery needs to be charged?

When the Light battery is in need of a charge, the power button will flash 8 times when pressed. At this time, connect the Light battery to the Light wireless USB Charger (at the base of the Light Battery). A red LED light will illuminate at the base of the battery to indicate that a charge is being administered. Once the red LED light turns blue, the Light battery has been fully charged.

How should I care for my Light Vaporizer?

Any concentrate that may have collected on the body of your Light can be removed with a warm damp cloth. If you need to remove concentrates from inside the crucible, you can do so using your Light Tool. USE CAUTION and be extremely careful not to damage the atomizer coil. Within the crucible of your Light tank, the coil works to clean itself by clearing off any residue that comes in contact with it. We don’t recommend using any type of liquid cleaning agent in the Light tank, as doing so could cause it to malfunction.

How often should I clean my Light Vaporizer?

Within the crucible of your Light atomizer, the coil works to clean itself by clearing off any residue that comes in contact with it. We don’t recommend using any type of liquid cleaning agent in the Light crucible, as doing so could cause the atomizer to malfunction. If you need to remove concentrates from the crucible, we don’t recommend it, but you can do so using your Light Tool.

Is it okay to use isopropyl alcohol on my Light Vaporizer?

On certain parts alcohol is fine. The top cap will incur the most buildup, soaking it in alcohol or cleaning with alcohol soaked cotton swab are effective cleaning methods. Cleaning the atomizer is not recommended, replace as needed. Make sure you don’t expose the atomizer or battery to any liquids whatsoever. If you need to clean the outside of the Light, use a warm damp cloth. If the Light gets wet in any way, allow to dry in the sun or a warm dry area until COMPLETELY DRY. Attempting to use the Light if wet will cause serious damage to the unit.

What parts of the Light Vaporizer will I need to clean the most?

The top cap will incur the most buildup, soaking it in alcohol or cleaning with alcohol soaked cotton swab are effective cleaning methods. Make sure you don’t expose the atomizer or battery to any liquids whatsoever.

What is replaceable on my Light Vaporizer?

The coil atomizer should be replaced as needed on the Light, and will be available on VapeWorld.com soon. CAUTION: Over time even the purest concentrates will allow buildup to collect on the Atomizer coil; removing this with a tool will damage the coil. On average, atomizer coils last 4-5 weeks of normal use; your experience will vary.

How long is the warranty on the Light Vaporizer?

90 Day

Is the warranty extendable?

Not at this time.

I purchased my Light Vaporizer from vapor, and I think I have a warranty issue. Who do I contact, vapor or Dr. Dabber?

vapor is handling all of the warranty requests and service for the Light.