How do I use the Plenty Vaporizer?
– Once Plenty Vaporizer reaches the required temperature, its heater switches off and starts to cool down. In order to prevent it and maintain the same temperature, hold the “trigger” on the handle pressed throughout the whole session.
– If you want to place your vaporizer in a vertical position, put the brush included in the set into the hole located at the bottom, beside the temperature knob. Your Plenty will stay in a vertical position and won’t fall down.
– To get the thickest vapor possible, take long and slow draws. The more vapor goes through the herbs, the more vapor will be produced.
What is the Best Grind Level for the Plenty?
Medium grind is best, you want maximum surface area, yet not so fine as to escape through the holes in the screens.
Why do I need to let my Plenty preheat? How do I know when it’s good to start vaping?
You’ll need to wait 2-3 minutes before the heating element heats up to allow for vaporization. You’ll notice when you first turn on the heater, the orange light illuminates, indicating the heating element is on and warming up. When it reaches the optimal temperature, which you set with the dial, the orange light is going to turn off. The orange light going off indicates that the system has reached the proper temperature, and is ready to use!
As you squeeze the handle on your Plenty, the orange light might flicker intermittently as the thermostatically controlled heater occasionally kicks on to keep the Plenty at the temperature you set.
Why is there no vapor when I first draw from the Plenty?
When you load the filling chamber, you are often putting room temperature aromatic blends into a room temperature filling chamber. As the Plenty forces warm air over and through your blends, they absorb this heat until they themselves reach the point of vaporization. So when you first turn on the forced air, it will take a short period for the chamber and blends to heat up.
What determines the vapor quality coming out of the Plenty?
You can vary the vapor quality the Plenty produces quite easily. Grinding your blends finer will create more surface area, allowing more blend to vaporizer at once. Adjusting the temperature can also have an effect, as higher temperatures will allow more vapor to be released at once. Use only the optimal temperature for your blend. Use caution as you increase your temperature, only increase a few degrees at a time until you achieve your perfect result.
Is the Plenty compatible with liquids and concentrates?
With the use of the included Liquid Pad combined with the wide temperature range of the Plenty, it is able to be used with liquids and concentrates.
What is the point of the Plenty's Liquid Pad?
The Plenty comes with a Liquid Pad, which serves two purposes.
First, it allows you to use a wide range of aromatic liquids and concentrates in your Plenty. Simply insert the Liquid Pad into the Filling Chamber, and apply your concentrates or liquids, then use your Plenty as normal. Users have reported that higher temperatures work well with liquids and concentrates, so start with your normal temperature, and go up incrementally from there until you find your desired vapor quality.
Secondly, since the Plenty is a hand-held unit when in use, the filling chamber does not remain flat, such as the Volcano does. As a result, of the filling chamber in the Plenty is not full, the blends could move around a bit and settle, allowing the warm air to pass right by your blends without heating them sufficiently. Using the Liquid Pad with smaller amounts of blends will prevent this from happening.
How do I use the Plenty Liquid Pads?
Using the Liquid Pad is simple. Place the Liquid Pad into your Filling Chamber, then drip or apply your liquids or concentrates to the pad. Then, simply use Plenty as you normally would. Users have reported that higher temperatures work best with liquids and concentrates, we recommend starting at your normal temperatures and working your way up until you find the perfect temperature for you liquids or concentrates.
Will the Plenty work with a 240v power supply?
vapor.com only carries the North American 110v Version at this time. For a 240v version, please contact Storz & Bickel directly.
What is the temperature range of the Plenty?
The plenty is capable of temperatures from 100°F (37.8°C, to `420°F (214°C)
What is the Plenty made from?
The Plenty uses only the finest materials available. The heating block is ceramic-clad aluminum, the screens and cooling tube are stainless steel, and the plastics and silicone used are of the absolute highest food-grade quality.
What is the Plenty Vaporizer heating element made from?
The Plenty’s heating element is made from ceramic-clad aluminum.
How full should the Plenty Vaporizer's heating chamber be?
You can put any amount you wish into the heating chamber, although owners have reported that larger amounts create a more enjoyable experience.
If you load a smaller amount, it is vital that you use the included Liquid Pad. As the Plenty is a hand held device, a lightly-filled heating chamber will allow the blends to move around as the Plenty is moved, allowing the warm air to travel around the blends, as opposed to through them. When using a small amount, spread it evenly, then place the Liquid Pad on top of it, sandwiching the blend between the bottom screen and the Liquid Pad. Now use as you normally would.
How often should I stir my bowl when using the Plenty Vaporizer?
The Plenty has a wide heating chamber that allows for maximum contact with passing warm air, and should not need stirring. However, we will leave this up to your preference. If you feel that you need to stir your blend, please do.
Does the aluminum heat exchanger on the Plenty emit any substances which are subsequently absorbed by the user?
No. the top temperature reached in the heat exchanger 464°F (240°C) is by far below the temperature that is needed to emit any substances out of the aluminum alloy Al-Mg-Si, melting point 1220°F (660°C); boiling point 4566°F (2519°C) used by us.
Is it okay to leave the power to the Plenty on all the time so its always ready?
The Plenty has an auto-shutoff feature that will turn the heater off after it achieves it set temperature. Engaging the handle will cause the heater to turn back on and remain at the set temperature as long as the handle is occasionally squeezed.
As a general safety rule, do not leave the Plenty unattended while powered on.
Does the Plenty have an auto-shutoff feature?
The Plenty is equipped with a temperature safety regulator. When the auto off release handle is first activated and the set temperature is reached, the heating process is terminated and the heater is turned off.
If the auto off release handle is pressed while the Plenty is held in the hand during operation, then the set temperature level will be automatically retained. Once the temperature of the heat exchanger cools off, an automatic reheating will not occur; instead the cooling process continues until the orange auto off release handle is pressed again. The Plenty is brought back to life by the orange trigger inside the handle.
Simply grabbing the handle is enough to disable standby mode and re-engage the heater.
What size Screens does the Plenty use?
Plenty’s Screens come in one size, but two different grades, normal and fine.
Do I need to set the temperature on the Plenty each time I turn it on?
Nope, the Plenty has a manual temperature dial, so it always remembers the last temperature you used. Verify with each use that it is set correctly. A manual dial can be accidentally moved.
How do I care for my Plenty?
Always unplug the vaporizer from the electrical outlet and allow to cool COMPLETELY before cleaning, 30 minutes should be sufficient.
Always make sure your vaporizer is COMPLETELY dry before plugging it back in.
Do not attempt any internal or external repairs to your unit as doing so may cause fatal injury – or worse – void your warranty! (Please contact us if you feel something is wrong with your vaporizer.)
Like any high-tech equipment, you should handle your Plenty with care. Make sure it is in a place where no one will trip over the power cord. Always use two hands when you carry it.
Keep your spare parts clean. This will result in the best performance, and not cause any unnecessary stress on the machine.
Make certain it is packaged well during transport. If you didn’t purchase an Elite carrying case…keep the original box and Styrofoam! It should last you until you pick up your own hard or soft case.
How do I clean my spare Plenty Vaporizer parts?
The Plenty uses only the finest quality materials. It is perfectly fine to put your non-electric parts in the dishwasher, or for more detailed cleaning, isopropyl alcohol is an excellent cleaner.
How often do I need to clean my spare parts?
You should clean the spare parts when they get dirty. Look specifically at the upper screens and stainless steel areas that collect buildup. Inspecting your parts periodically will help to make the parts last longer and the machine perform at its best.
Use the included cleaning brush regularly to help keep you parts free of debris between more thorough cleanings.
Am I able to clean the grinder that came with my Plenty with isopropyl alcohol?
No! Isopropyl alcohol isn’t good for your Plenty grinder.
Rinse with warm water and repeat if necessary.
What parts of the Plenty will I need to clean the most?
What parts of the Plenty will I need to clean the most?
What is replaceable on my Plenty?
Everything from the heating chamber to the mouthpiece is replaceable.
What kind of cleaning tools work best with the Plenty?
Periodically use the included brush(dry) and for more serious buildup, soak any part that does not plug into the wall in isopropyl alcohol.
Your website advertises a free acrylic grinder with every order. I ordered a Plenty recently, and I now notice that my order confirmation does not reflect a complimentary acrylic grinder with my order. What happened?
The Plenty Vaporizer system already comes with a complimentary Storz & Bickel grinder. We’ve got you covered!
What is the warranty on the Plenty vaporizer?
The Plenty has a 3 year warranty from the manufacturer if it is purchased from an authorized retailer such as Vape World.
Much more detailed warranty information is available on the Warranty tab.
Is the Plenty Vaporizer warranty extendable?
Not at this time.
I purchased my Plenty at vapor.com, and I think I have a warranty issue. Who do I contact, vapor or Storz & Bickel?
Please contact Storz & Bickel.
I tried to put a discount code in for my Plenty order, and it won’t work! Why?
We are always glad to assist our valued customers in discounts and price matching, whether retroactively or at the time of your order. At this time, there are no applicable discount codes for Storz & Bickel vaporizers or products.
How do I register the warranty for the Plenty?
Your registration begins on your purchase date. Retain your proof of purchase in case you ever need to get a hold of Storz and Bickel for any warranty information.