Creative Seshing Methods

Creative Seshing Methods

When it comes to smoking, ingenuity often goes hand-in-hand with necessity. Whether you're a seasoned enthusiast or a curious novice, there are times when traditional accessories aren’t available. That's when creativity shines. From makeshift pipes to upcycled rolling papers, here are some unconventional smoking accessories that showcase the resourcefulness of smokers everywhere.

The “You’re Definitely Inhaling Plastic” Water Bottle Pipe

One of the most notorious DIY smoking devices is the water bottle pipe. With just a water bottle, some aluminum foil, and a bit of ingenuity, you can create a functional smoking tool. Here's how it typically works:

  1. Materials Needed: An empty plastic water bottle, a small piece of aluminum foil, and something to puncture the bottle.

  2. Assembly: Poke a small hole near the bottom of the bottle for the carb (airflow control). Then, create a bowl by shaping the aluminum foil into a small cup and poking tiny holes in the bottom. Place this foil bowl into the neck of the bottle, securing it in place.
  3. Usage: Fill the foil bowl with your substance of choice, light it up, and inhale through the mouthpiece of the bottle. Cover and uncover the carb hole to control the airflow.

Though effective in a pinch, it's important to note that this method can release harmful chemicals from the plastic and foil, so it should be used sparingly.

The Vegan Apple Pipe

For those seeking a healthier and more environmentally friendly alternative, the apple pipe is a great choice. It’s simple to make and even easier to dispose of—just eat it!

  1. Materials Needed: A fresh apple and something sharp like a pen, knife, or skewer.
  2. Assembly: Remove the stem from the apple. Poke a hole from the top where the stem was down to the center of the apple to create the bowl. Then, poke another hole from the side of the apple to intersect with the first hole, creating the mouthpiece. Optionally, you can add a carb hole on another side.
  3. Usage: Fill the top hole with your smoking material, light it, and inhale through the side hole. The apple naturally filters the smoke, providing a smoother hit.

The apple pipe is not only effective but also leaves no waste behind—except for the core.

Quiet Down with a Sploof

Sometimes, discretion is necessary, especially when trying to mask the smell of smoke. Enter the sploof, a simple device that helps reduce odor.

  1. Materials Needed: A cardboard tube (like from a paper towel roll), dryer sheets, and a rubber band.
  2. Assembly: Fill the cardboard tube with a few dryer sheets, leaving one end open. Cover the other end with a dryer sheet and secure it with a rubber band.
  3. Usage: Exhale your smoke through the open end of the sploof. The dryer sheets help filter and mask the odor, making your session less detectable.

While not foolproof, a sploof is a handy tool for those times when discretion is key.

The Upcycled Joint

Sometimes you find yourself without rolling papers. That’s when a little creative thinking can turn everyday items into functional solutions. Upcycling thin paper from notebooks can work as an alternative.

  1. Materials Needed: Thin, uncoated paper (like from a notebook), and something to roll with.
  2. Assembly: Tear out a page from the notebook and cut it to a suitable size. Make sure the paper is thin and doesn’t have any glossy coating or ink that could be harmful when burned.
  3. Usage: Roll your substance as you would with regular rolling papers, seal it, and enjoy.

While not ideal, this method is a testament to the resourcefulness and adaptability of smokers.


Unconventional smoking accessories highlight the creativity and adaptability of the smoking community. From water bottles and apples to upcycled notebook paper, these makeshift tools serve as reminders that sometimes the best solutions come from thinking outside the box. Just remember, while these methods can be useful in a pinch, they often come with health risks, so use them sparingly and with caution.