How long does it take to charge?
1.5 Hours.
How do I charge the Pulsar APX Wax?
To do that, plug the micro USB into the battery, then plug the USB into a computer or wall adapter.
How do I know that the Pulsar APX Wax is fully charged?
While charging the battery charge progress is indicated by a series of green LED’s flashing in a consecutive order.
How do I set the temperature?
You do not need to set the temperature, the Pulsar APX Wax will heat up to its max temperature in seconds once the button is pressed.
How long does it take to preheat?
The Pulsar APX Wax heats up instantly.
How do I use the Pulsar APX Wax?
First assure your Pulsar APX Wax is fully charged.
To do that, charge via USB provided.
First remove the glass cover/mouthpiece to expose the heating chamber and carefully load your concentrate directly to the coil of the unit.
If your concentrates are stickier APX recommends pre-heating the unit for about 4 seconds to allow your wax to easily melt onto the coils.
Once loaded replace the glass cover and turn the unit on.
To do this click the power button 5 times quickly, the LED’s will flash as the device turns on.
Next press and hold the power button to engage the heating element.
The logo on the unit will turn from red to green when the unit has reached drawing temperature and you can begin to draw from the unit while still holding down the power button.
When you’re finished with your draw release the power button and clear the rest of the vapor in the mouthpiece with the end of your inhale.
And that’s it; this unit is really simple and straight forward.
Is the Pulsar APX Wax compatible with dry materials?
No, we recommend purchasing the Pulsar APX designed for dry materials.
How full should the chamber be?
It’s best to not fill the heating chamber full. Just apply enough for one session at a time. The Pulsar APX Wax was not designed to hold more than one session at a time.
How often should I stir my material?
You don’t need to stir the concentrates on the atomizer.
How do I replace the atomizer?
The Pulsar APX Wax atomizers are not rebuildable, you can replace them very easily by disconnecting them from the unit, and replace with a fresh atomizer coil.
On average, atomizer coils last 4-5 weeks of normal use; your experience will vary.
Does the Pulsar APX Wax use screens?
No it does not.
Is there an auto shutoff?
Yes it will shut off after 30 seconds of being engaged.
How often should I clean my Pulsar APX Wax?
Within the crucible of your Pulsar APX Wax atomizer, the coil works to clean itself by clearing off any residue that comes in contact with it. We don’t recommend using any type of liquid cleaning agent in the Pulsar APX Wax crucible, as doing so could cause the atomizer to malfunction. If you need to remove residue from the crucible, we recommend doing a burn-off.
Is it okay to use isopropyl alcohol on my Pulsar APX Wax?
On certain parts alcohol is fine. The top cap will incur the most buildup, soaking it in alcohol or cleaning with alcohol soaked cotton swab are effective cleaning methods.
Cleaning the atomizer is not recommended, replace as needed.
Make sure you don’t expose the atomizer or battery to any liquids whatsoever. If you need to clean the outside of the Pulsar APX Wax , use a warm damp cloth. If the Pulsar APX Wax gets wet in any way, allow to dry in the sun or a warm dry area until COMPLETELY DRY. Attempting to use the Pulsar APX Wax if wet will cause serious damage to the unit.
What parts of the Pulsar APX Wax will I need to clean the most?
The top cap will incur the most buildup, soaking it in alcohol or cleaning with alcohol soaked cotton swab are effective cleaning methods. Make sure you don’t expose the atomizer or battery to any liquids whatsoever.
What is the warranty on the Pulsar APX Wax?
Pulsar offers a 6 month limited warranty on all Pulsar batteries, chargers, and any other accessory found to be defective as a result of manufacturer error.
If you have a customer seeking warranty servicing please direct them to the manufacturer by providing them with the email or customer service number below.
Warranty Contact:
Email: info@pulsarvaporizers.com
Support Ticket: www.pulsarvaporizers.com/contacts
